Processing
Nutritional Rice Production Line Helps Self-Heating Rice Production 2020-09-19 18:39:06
Traditional instant noodles need to be soaked in boiling water to eat. Some special people, such as travel and business trips, cannot eat hot food without boiling water. When eating instant rice, you don’t need boiling water or thermal power. Open the outer packaging and put the pure water inside. The bag is poured on the heating bag, the water and the heating bag are automatically mixed to heat up, the rice and dishes are steamed. And it can be eaten in 8-15 minutes.   The self-heating rice comes with a heating bag. After encountering water. The temperature rises immediately within 3-5 seconds. The temperature is as high as 150℃. The steam temperature reaches 200℃. And the long heat preservation time can reach three hours. It is easy to...
How Does The Small Twist Snacks Production Line Work? 2020-09-21 13:17:27
Twist snack has always been handmade and is famous for Tianjin twist. Because its taste and quality are well-known in the market. It has become a major feature of Tianjin.   However, as the market continues to expand, labor costs continue to increase. And people’s taste changes, puffed snack foods have become popular in the market and occupy a major position. The twist has gradually changed from handmade to automatic puffing snack machine production. Twist snack was born from this.   Our company has made a new development project corresponding to the market. The industrial snack food processing equipment puffing small twist machine production line, using flour as the main raw material. After deep extrusion by a twin-screw...
What Is The Working Principle And Composition Of The Twin Screw Extruder? 2020-09-22 09:47:21
The powdery raw material is transformed from powder to paste through the extruder machine. And then gelatinized and cracked. The raw fiber is partially degraded and refined. It can not only effectively kill microorganisms, bacteria, etc.. But also under strong pressure. Under the influence of poor, the instant the material becomes pasty is ejected from the die hole, an extruded product with a loose structure is formed. And the bad factors are passivated to improve the appearance of the twin screw extruder machine product.   Currently, we sell two types of screw extruder machine. One is a single-screw extruder. And the other is a twin-screw extruder machine. Compared with the former, the advantage of twin screw extruder is relatively more...
Do You Know The Advantages Of Pet Feed Production Line? 2020-09-23 13:19:34
With the continuous progress and development of society, the use of automatic pet feed production lines is also increasing. Do you know the advantages of industrial pet feed making production lines? Let me explain to you the advantages of full automatic pet feed making machine:   The material can be matured in 10 seconds under the action of the high temperature of the twin screw extruder. And the cooking can be completed in a very short time. It can retain the protein, energy and vitamin content in the material. And it improves the digestibility and palatability of the product. Puffing and molding: The raw material is suddenly reduced in pressure after continuous high pressure. It can make starch cells gelatinize and oil...
What Are Some Important Factors That Affect Frying Oil? 2020-09-23 13:34:36
Several important factors affect frying oil, what kind of oil is suitable for frying? The first thing we should consider is that the heating temperature of the oil is generally higher when frying food, and the stability and oxidation rate of the oil under high temperature conditions. Shandong Loyal industrial frying oil filter is a special equipment for processing food frying oil. Loyal industry experience and research summarize several important factors that affect frying oil.   Consider From The Oxidation Rate: Due to the different fatty acids contained in oils, the oxidation rate varies greatly. Saturated fats have the highest stability and are the least prone to oxidation. The higher the degree of saturation of fat used for frying, the less likely it is...
Do You Know The Reasons And Solutions For The Low Temperature Of The Food Extruder? 2020-09-24 10:23:46
With the continuous progress and development of the society, the use of double screw extruder puffed snack machinery is also increasing. So in the process of using it. You will definitely encounter such and other problems. Now I will explain to you the reasons for the low temperature of the twin screw extruder snack puffing machine and the solutions.   Why is the temperature of full automatic corn food puffing machine too low? The reasons are as follows: 1. The pressure ring diameter configuration of puffing equipment is too small. 2. Excessive wear of the pressure ring. 3. The selected die hole is too large. 4. The raw material moisture is too high. 5. Insufficient tempering.   Solution: 1. Choose a larger...
Attention To The Use Of Frying Machinery And Equipment 2020-09-25 09:40:26
Fried noodle snacks have always been children's favorite noodles. Especially the two types of fried noodle snacks, fried twist and fried hornets, are in short supply in the market.   The fryer will be a must for many manufacturers at this time. If you don’t understand the specific usage and functions of the equipment. And it will eventually lead to the inability to use the equipment normally and delay the work progress. Before using the equipment, clarify the product to be produced, and use different oil and oil temperature according to the product. Pasta and puffed food series such as twist, shaqima, cat ears, etc., suitable for frying equipment.   The automatic frying equipment must be refueled into the furnace body before use....
Which Oils Are Suitable For Frying And What About The Oils That Have Been Fried? 2020-09-25 09:58:48
Committed to helping the development and research of the automatic fried food industry. Loyal Food Machinery has launched a series of cooperation with many catering industries and food processing plant. And we look forward to your participation. The editor of Loyal Food has compiled some relevant information on oil of industrial frying machine for you, for reference only.   (1) Lard, tallow, palm oil, coconut oil, peanut oil, suitable for frying; (2) Refined vegetable oil, suitable for stir-frying and frying; (3) If you use rapeseed oil, please choose double-low rapeseed oil; (4) Primary cold-pressed olive oil and tea seed oil are only suitable for cold dressing; (5) "Self-squeezed oil" and "soil-squeezed oil" have...
How Is The Pet Feed Extruder Machine Maintained? 2020-09-26 09:57:55
With the continuous progress and development of the society, the use of twin screw pet feed extruders is also increasing. And the maintenance of the double screw dog feed extruder machine is becoming more and more important. Below, Loyal will explain the maintenance tips of the automatic feed extruder machine:   1. Keep the equipment around the industrial pet feed extruder equipment clean. 2. Lubricating grease should be added to the feed puffing case body bearing in time. After 500 hours of operation, all the lubricating grease should be replaced once. 3. The other bearing parts of the full automatic pet feed extruder equipment should be filled with grease regularly.   4. Check the...
Do You Know The Troubleshooting Of The Double Screw Feed Extruder? 2020-09-28 08:46:53
Twin screw feed extruder machine is a kind of Shandong Loyal puffed snack machinery. It is mainly used for food puffing, livestock and poultry feed or for puffing single raw material. This series of dry and wet extruder machine is suitable for large, medium and small feeding farms, feed factories and food factories. If the automatic twin screw extruder machine breaks down, what should we do? Now, Shandong Loyal will explain to you the troubleshooting of the double screw feed extruder:   1. Strange noises appear in the body, the bearings are rotten, worn, and lack of oil. Maintenance method: disassemble the large belt pulley, and hammer out the main shaft forward or backward. Install the rear axle bearing first, fix the...